Questions & Answers for: shifter cable loose

...shifter is loose need help! my shifter is loose every tine i go to shift into 1st my hand nearly hits the dash adjust the steal connections at gearbox there at the end off the cables attached to your ...

shifter cable installed. And now its stuck in second gear. The shifter goes up and down but it's not catching which leaves it stuck in second gear! Please help Greatly appreciated I have work at 7 and

Shifter Cable came loose. I can manually put the cable on the post and then shift. However it keeps popping off. Can this be rigged, without buying a whole new shifter cable? How hard is it to install

shifter cable may have worked loose or broken. do you feel the same resistance that you used to when shifting? or just a very loose floppy shifter,if so,i suggest a broken or loose shifter cable.thank

shifter arm up. Look under dash where steering column is. Find the connection for the shift cable. see if the mount that the cable end connects to is loose. wiggle it. If it is there are 2 torx screws

...the shifter is very loose up and down ,but the dash shows still in 3rd gear? The other end of that shifter is on top of the transmission.at the end of the cable. Check there for loose or worn ...

...the vehicle. A rod or cable will go from the shifter to the transfer case. If it is a cable and the ends appear attached the cable is broken inside the housing. Reattach ends of rod or replace cable

where do cables go? cables loose from arm rest to motor.dangling loose shifter cables go to your missing shifter.

floor shifter is loose Hard getting into proper gear. How can I tighten it. Usually, if the shifter is loose, the bushing on either end of the cable is worn out, and the cable must be replaced.

...put my shifter in drive, the shifter got very loose and now it wont go into park. I already tightened the bolts which I thought was the solution. Cable has come loose from the shifter or