Questions & Answers for: Ford shaft seal

Question about 2002 Explorer

1 Answer

...shaft seal my tail shaft seal is leaking how do i replace it Unbolt the drive shaft from the rear differential. Slid the driveshaft yoke out of the transmission tale stock. The seal is right there at ...

Ad

Question about 2005 F 250 Super Duty

1 Answer

...shaft, remove old seal with a Seal Puller, place lubricant on inner lip of new seal, install new Seal carefully & do not damage the Output Shaft of Transmission with hammer etc. , reinstall ...

Ad

Question about 2005 F 250 Super Duty

1 Answer

...shaft seal leaking after replace seal 1996 ford festiva wb manual gearbox cv input shaft seal leaking after replace seal what can we do next Firstly, make sure the seal you fitted is the correct one, ...

Question about 1987 Ranger

1 Answer

...seal once the shaft is out you can use a large screwdriver to pry it out, the seal has a metal outer case which you can see. clean the area where the seal sits before putting the new seal in ...

Question about 1995 F150 Styleside Regular Cab

1 Answer

...shaft back out, Pry the seal out of the transmission housing and replace seal. Use a socket the same size as the new seal and lightly tap into place. Reinstall the drive shaft and you should be ready ...

Question about 1995 F150 Styleside Regular Cab

1 Answer

Shaft Oil Seal -4.0L SOHC and 4.0L EI, Conventional Special Tool(s) Axle Seal Replacer T83T-1175-A Axle Wheel Bearing Puller T83T-1225-A Axle Wheel Bearing Replacer T83T-1225-B Driver Handle T80T-4000

Question about 1995 F150 Styleside Regular Cab

1 Answer

...seal. The shaft would have to be put on a flat surface after being removed. Then maually rotated to see if it is still straight. If straight, you still would need to Mic the surface to see if it was ...

...shaft to move concentric to the seal edge the seal then cannot preform its duty as the seal surface is continually lost and so leaks So it would appear that the bush is worn or in the case of ...

Question about 2002 Thunderbird

1 Answer

...drive yoke off the pinion shaft remove the old seal install new seal install front drive shaft. PS check pinion bearing play before removing drive yolk. if it is loose then you might also need ...

...shaft seal.No problem with the sector shaft surface nor the box surface where the seal sits. The seals are from the states and the seals are installed correctly.Does the brake booster cause pressure ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2000 Ford Focus
2000 Ford Focus

3,749 Questions

1998 Ford Explorer
1998 Ford Explorer

2,998 Questions

2001 Ford Focus
2001 Ford Focus

2,612 Questions

1999 Ford Taurus
1999 Ford Taurus

2,348 Questions

2004 Ford F150
2004 Ford F150

2,636 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...