Questions & Answers for: Bunn shaft seal

...Shaft Seal. is there still a problem or do we need to reset something to get the message to disappear. You need to go through the menu and tell the machine that the maintenance is done, hold down the ...

...shaft,Part # 32449.0000.This machine when there is a problem tells you exactly what part went bad.Could also be the torque sensor board,Part #27939.1000.Alot of the problems stem from not lubricating ...

front of the shaft where it hits the auger, the bowl bushing, and the front shaft seal. bunn service suggests a preventive maintenance every yerar, but the bowls and filter should be cleaned regularly

...seal is opaque, cup shaped, and on the shaft. replace that, lube the edge with food safe lubricant (i.e. superlube), lube the large round bowl seal in the back and put it all back together. you may ...

...shaft seal push the little black button at the front bottom right on the bowl and lift the bowl front and pull it towards you to remove. pull the auger off and the shaft seal is the opaque cup-shaped ...

how to get maintenance and shaft seal off the display You need to go into the programming, and answer yes to the "PM COMPLETE"....

shaft seal on a bunn slushee machine we cleaned it now it says maitenance on a shaft seal don't know what that is and don't know how to clear it the shaft seal is the cup shaped seal between the auger

shaft seal in the front inside the evaporator (steel tube), and the cup-shaped seal between the auger and the evaporator. slush is getting inside the shaft tube and dripping through the inside rear of

...shaft seal off diplay hold down the word "gourmet" near the display for 5 seconds and release when the words change. it is a hidden button to get you into the menu. press and release until you get to ...

...shaft maintenace due mean It means your machine needs to have seals and bushings replaced. This maintenance should be performed twice per year to keep your Bunn Ultra 2 in working order. This is ...