Questions & Answers for: sewing machine needle keeps hitting

...machine. I hope these solutions help you. The Shuttle is made of plastic, with only the top made out of metal. My needles kept hitting the shuttle when sewing thick material or hitting needles, ...

...needle keeps hitting the plastic bobbin holder - how can I fix this? Is the bobbin holder inserted wrong? change the needle and see if it is still hitting because once they hit the case or the feed ...

...needle keeps hitting the plate and breaking. How do I fix this? Take the needle plate off and see where it needle is connecting with the bobbin. The bobbin case may not be in place and this is what ...

...machine jams Check to make sure the needle is up all the way into the clamp. If the bobbin case now has sharp edges from the impact. polish away the sharpness with an emery board or simular. Once a ...

...(bent or missing parts) If there is no damage to either of these then the timing of the machine may need to be adjusted. This is usually best left to someone with sewing machine repair

...side when it comes back up. When I reverse it, the needle hits the metal under the bobbin. The needle and the hole do not match up. try changing needles also possible that the machine is out of ...

...sure it's the correct needle for the machineif the needle keeps hitting the bobbin plate then the machine may be out of time & would have to be take to a sewing machine shop for

...sewing machine is out of time & needs to be retimed at a sewing machine repair shop.here's a link for a free manual ...

...sewing machine SL 9240 was giving to me and when I try to sew the needle keeping hitting the bobbin holderr. When needle start down to catch bobbin thread, it hit the bobbin holder, it does not line ...

the bobbin case is not placed correctly. After cleaning your sewing machine, you may fail to put back the bobbin case into its original alignment. https://sewingmachineclub.com/needle-hits-bobbin-case