...sewing machine model # 3205FA Could be threaded wrong - check manual for proper threading Needle could be bent - check and replace if needed Needle plate could be damaged - see if any burrs are on it ...
Question about 7442 Mechanical Sewing Machine
...when fabric jammed while sewing. After jam was cleared needle hits plastic every time. Perhaps you have bent the needle. Or perhaps you have shifted the bobbin somewhat while removing jammed
Question about 19233 Computerized Sewing Machine
...sewing machine. Raise the needle bar to the highest position, then loosen the clamp screw to remove the old needle. place the new needle in the clamp with the flat side of the needle facing the back ...
...sewing machine. Raise the needle bar to the highest point, then loosen the clamp screw to remove the old needle, place the new needle in the clamp with the flat side to the back of the machine or if ...
Question about Shark 9110 Sewing Machine
...will get out of time, often as a result of broken needle. Search for sewing machine timing or take it for service, otherwise it will simply continue to break needles and possibly damage the
Question about Shark 9110 Sewing Machine
sewing machine Last night I jammed a needle and something happen to the bobbin winder. The round thing on the side(???) won't work(so the needle willn't go upa When the neddle jammed there was
...Finally got bobbin and needle out, but still can't unjam the machine. sometimes when a machine jams, the machine jumps timetaking it to a sewing machine shop to be serviced would be a good ...
...sewing plate. rethread the machine top and bobbin make sure to use every thread guide it helps the tension try a new needle--make sure it's the right needle for the fabric being sewed make sure the ...
Question about XL-3030 Electronic Sewing Machine
...sewing machine needle (very new one) keeps jamming every couple of turns of the needle - and the thread is very loose and loopy on the fabric. It makes a jarring noise Rethreading, changing needle ...
Question about XL-3030 Electronic Sewing Machine
machine to jam. Sewing speed: Slow down when sewing in reverse. Sometimes going too fast in reverse can cause the machine to jam. If none of these solutions work, it may be a mechanical issue with the
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions