Questions & Answers for: Janome sewing machine jammed wheel

...sewing it jammed. i have removed the needles and threads. still jammed. the wheel{large knob} on right hand side of machine that lifts the needles up and down is jammed, it wont turn. when press on ...

...jammed with thread or fabic. Totally rethread your machine and clean out your bobbin area. Then try turning your wheel towards you. If, you do not have your manual to check, go to ...

hand wheel is locked and Lo appears on the screen .No jammed threads check your bobbin is wound evenly and put in the right side up

...jammed in the machine 2. is the needle bent 3. is the material too thick then I noticed the hand wheel was very tight. How can I fix this. There is no broken needle, thread, jam or anything. I have ...

the needle threader bar was straight (approximately 1/2 way between the needle being all the way down and all the way up). Turned on the machine and the threader came back up again. Now back to sewing

...machine has jammed solid. How can I loosen it? We have made sure the lower spool is clear of cotton, dust etc. We have move the hand wheel very slowly by hand, it is very difficult to do and locks as ...

...Sewing Machine ... www.thriftyfun.com/Repairing-a-Janome-or-New-Home-Sewing-Machin... Question: Memory Craft Machine Won't Run ... I'm a computer repair technician and good with tools, is this ...

...machine janome jf 1004 is jammed and the wheel won't turn. There isn't any thread caught anywhere Have you removed the sewing plate and looked underneath feed dogs an bobbin for jammed thread or lint ...

...720 jammed wheel jammed wheel on sewing machine Force it hard in the direction of travel using the handwheel. You can't break it. The remove needle and thread and run at full speed for 10

Janome Platinum 720 sewing machine wheel is jammed The wheel is locked and cannot make the needle rise or go down. I have taken the plate off and cleaned the bobbin area. MIGHT BE A TIMING PROBLEM