...jammed machine was working fine when suddenly it just jammed up. Everything seems to be fine, but the balance wheel is completely jammed rigid. I've looked at the shuttle and there are no thread jams ...
Question about CS-8060 Computerized Sewing Machine
machine jammed wheel will not turn needle will not move motor jammed wheel will not turn a loud noise whenever ewe try to start Thread is caught in the hook...Remove the upper thread and bobbin case, ...
Question about CS-8060 Computerized Sewing Machine
sewing machine jammed wheel will not turn sewing machine jammed wheel will not turn Thread is caught in the hook...Remove the upper thread and bobbin case...turn the hand wheel backwards and forwards ...
Question about SE-270D Computerized Sewing Machine
machine jammed while sewing - it acts like something is keeping it from sewing. The wheel is hard to turn. I cleaned the shuttle, there is no thread inside and the safety lock did not come on. It ...
sewing fine, started makinga noise and then slowed and then stopped. Wheel will not turn. Stitches look fine, did not drag or skip. Hello, If you are unable to move the wheel then something is locking
Question about LS-2125 Mechanical Sewing Machine
...sewing machine LS 2125 is jammed up. what do i do Always turn the handwheel towards you, never away because you can mess it up. Check your bobbin area to be sure there is no lint, cloth etc jammed in ...
Question about XL3750 Mechanical Sewing Machine
machine. the hand wheel hi i have a brother 3600 machine. the hand wheel is too tight and does not turn and hence the machine does not work what is wrong pl it could be a jam or broken gear & need
Question about PE770 Computerized Sewing Machine
...machine is jammed, the wheel wont turn anymore - how do i get in there to clean it out? My machine made a funny sound and is now jammed up - the wheel wont turn, and I think there is thread stuck ...
...and clean bobbin case, put good quality sewing machine oil on oscillating hook and put new needle in flat side toward back all the way UP, and make sure presser foot UP when you thread ...
...down. None of the parts will move. is there any thread jammed anywhere?have you tried turning the machine off & on again?the machine probably needs to be serviced to see why it's not ...
Usually answered in minutes!
764 Questions
337 Questions
294 Questions
223 Questions
181 Questions