machine... it worked for a little while (15 minutes)and then the needle jammed. The whole part that moves the needle up and down doesn't move, manually or by pedal. I cleaned out all of the thread and
Sewing machine wheel won't turn, motor whirrs also the wheel seems to be jammed, it cannot be turned either clockwise or anticlockwise Make sure your bobbin winder is not engaged. Ten check to see if ...
Question about Activa 130
...jammed position, t The machine has only been used ocassionally in the twenty years I've had it but has always worked well. You might have bent your needle bar which would prevent movement of the ...
side wheel jammed tight on sewing machine Can't unscrew the screw is it left hand tread? try that.
Question about BERNETTE 65 Mechanical Sewing Machine
...machine manually to pick up bobbin thread. Can not turn wheel backwards. It appears to be hitting something good or is jammed. This occurred after winding the bobbin. then I can only assume you did ...
Question about BERNETTE 65 Mechanical Sewing Machine
...sewing. The light comes on and the machine makes the start up noise but, when I press the foot pedal, nothing happens.The foot works with other machines. check to see if any thread is jammed inside ...
Question about BERNETTE 65 Mechanical Sewing Machine
...jammed, and will not move presser foot up or down. How may this be overcome, and the machine be in working order? If it has been a long time since the machine has been thoroughly cleaned and oiled, ...
...bobbin will not activate when the door is opened either. I`ve had it when my needles jammed...hence locked up the machine...only thing to do is a pair of wire cutters break the needle and re ...
Question about BERNETTE 65 Mechanical Sewing Machine
..., caught with the wheels jamming It may be time to send it in for adjustment, There are several videos on youtube that you can watch that show in general how to set the timing on a sewing
...and doesn’t move the needles either. Any suggestions? Force the hand wheel in the normal direct of travel to break past that jam. You can't break it. Then run the machine full speed for 20
Usually answered in minutes!
64 Questions
435 Questions
168 Questions
165 Questions