Questions & Answers for: sew straight stitch shark euro

...straight stitch? What setting is suppose to be used to make a straight stitch on the machine? I can only get a zig zag stitch, even when the stitch selection is on "S". with the Shark Euro-Pro X ...

...stitch tension problem... My sewing machine is either pulling the bottom thread straight and the top thread is looped, (so that it gathers when you pull the bottom thread) or the top thread is pulled ...

...to what this is. My machine is going through the motions of the zig zag stitch but is only straight stitching. I have changed the needle to no avail... thank you! Jeanne how to thead the euro-pro ...

My zig zag and straight stitches are fine on the reverse but crazy on the top of the fabric. What's going on? - have tried adjusting tension but no use. I have a Brother machine Are they crazy tight, ...

...straight stitch to check that it's sewing correctly. Thread jams happen when you get nesting (knots of thread) under the needle plate. This occurs usually when you are sewing light or tightly woven ...

cannot find the straight stitch usually the dial is set on 0 This is correct, set your stitch selection to zig zag and the number to zero.

I have a Shark by Euro-Pro and cannot find the straight stitch. I have a Shark by Euro-Pro and cannot find the straight stitch button. Turn the knob on the font to 0 and see if that is the setting.

My sewing machine will not change from straight stitching to the zig zag pattern options Your gears are not aligning correctly inside the chassis. I would suggest taking your machine to a certified ...

...get a straight stitch. What is the little screw on the back of the machine with a + and - sign on the sides. what are the factory settings for tension...stitch size and correct  letter for ...

...straight stitch on the shark euro-pro 384 I was given this machine with no manual It should automatically be set on straight stitch when it is switched on. Which means the needle is in the centre. ...