Questions & Answers for: setting the humidity level

...humidity level area. Do I need to set it on the humidity level to pull water out of the air? Yes set unit humidity dial about half way or until it comes on. You need something to measure humidity. ...

humidity level on the unit is set higher than the humidity level in the house. Keep in mind, the humidity level you set the control to, is not the amount extracted from the air. It's the level you

...setting the humidity level to the lowest possible setting. Usually, that 45%. If the humidity level in you home is higher than that, the compressor should turn ON and run until either the bucket is ...

...setting at either 40-45%. If the humidity level is at or lower than 30%, the unit won't turn ON, until the reaches 35 - 40%. It's rare for the sensors to go bad. Just keep in mind, the ...

...setting humidity levels, which is what's important. If the operation of the unit continues to be a problem for you, contact Danby Customer Support 1-800-263-2629 and they can walk you through the ...

humidity level rises, above what have the unit set on. Here in, may be the problem. If you have the humidity level set higher than 50%, that's pretty high and the unit want remove much if anything

...humidity level to anything other than 50. Just bought and set up a Solius DP1-45-03 dehumidifier. Whatever humidity level I set, it reverts back to 50. What am I missing here? Is it reading the room ...

humidity level keeps blinking on display , is that normal on the Albert dehumidifier What does the user manual say about this? That is normal when the room humidity level (as detected by the hygrostat

...setting that adjusts the fan speed based on the humidity level in the room, or it could be a specific function designed for a certain type of room. I recommend checking the owner's manual or ...

...humidity level. Check the room conditions: The room conditions, including temperature and humidity, can affect the humidity level in the incubator. If the room is too dry, it can affect the humidity ...