Questions & Answers for: setting clock 12 hours 24

...12 hour clock is set to AM or PM. Good luck. Here's how it works on my si 686.

Push the mode button twice to enter the "set time" mode. Once the current time is blinking, advance hours by ...

...clock. Thanks, Ed When setting-up the time (by pushing the "mode" button), the alarm time set comes up first, followed by the time set. When setting the proper hour in this mode, simply continue ...

...12 or 24 hour. Clock The clock can be set to display time in a 12-hour or 24-hour format. The clock is set at the factory for the 12-hour format. To change the clock to 24-hour format: 1. Press and ...

clock setting. Well...this solution may be a few years late for the original poster, but I did figure it out on mine. If it's the same clock that sits on a rubber stand and you press the top edge back

...clock to a 12 or 24 hour system. For 12 hour - Touch clock pad once Enter the time using the number digits (1:00-12:59) Touch clock pad again For 24 hour - Touch clock pad twice Enter the time using ...

...clock with 1-thru-24 displaying for current time, vrs 12 hour am- 12 hour pm, then the choice is first thing you set before programming. The choice is made before setting current time, and usually ...

...Clock. Selecting 12- or 24- Hour Mode While in the Time screen, press or to select either 12- or 24-hour mode. If 12-hour mode is selected, PM displays for the afternoon/evening hours. AM does not ...

...clock from 12 to 24 hour and back. 12-Hour, 24-Hour or Clock Black-Out Your control is set to use a 12-hour clock. If you would prefer to have a 24-hour military time clock or black out the ...

...clock from military (24 hour) time to standard (12 hour) time please? Try this Setting the 12/24 time format The 12 hour format is set as the default. To change the 12/24 hour time format, open the ...

...Setting Clock - Brookstone Instruction Manual - Brookstone Brookstone https://manuals.brookstone.com > ... PDF 12/24 HOURS TIME DISPLAY SETTING 1. The "12h" or "24h" will start flashing in LCD2 ...