My front speakers quit working in my 2008 chevy duramax hd. Along with them the back up alarm doesn't work, and the seatbelt chime. Check for a blown fuse.
is the tps easy to replace? yes but u will need to adjust the setting.
in changing the knock sensors on 2000 suburban , do you have to replace any gaskets and if so witch ones If you have a 5.3 or a 6.0L engine the knock sensors ( 2 ) are under the intake manifold. You ...
I HAVE TO PUT THE SYSTEM IN BYPASS MODE TO TIME IT BECAUSE I INSTALLED A MSD DISTRIBUTOR AND COIL need to unplug a single wire it is behind glove box set timing then plug it back together
I Have a 3406b cat engine in a truck that has a misfire. I have reconditioned the pump and injectors, the engine idles smoothly, however when you increse the engine revs ,there is a misfire . I have ...
how do you set the timing on 1988 chevy pu 2500 4x4 is there a wire you have to disconect and if so where is it I have an 88 4x4 1500 and mine is located on the passengers side just under the glove ...
How to adjust worm gear worm gear on what as only ever seen a worm over wheel gear set up on a foden 32 ton 4 axle bulker ,they use a special oil as well as the gears are phospor bronze ,Now do you ...
Question about 1999 C/K 2500
97 k2500 350 bucks and runs rough at 2000-2500 rpms runs smooth accelerating replaced dcap,rotor,plugs,module,fuel filter,plugs wires and cleaned up ground. also cleaned up mass air flow sensor and ...
My 1996 I recently bought ran hot and by the time I parked it I turned it off and the holes busted and we replaced the holes and noticed smoke out the pipe but once it warm up got goes away.. but the ...
1997 k2500 front seat wont stay up Not a description that gives me a mental image of what isn't happening. Seat (mechanical) mechanisms are generally reliable and give little bother other than return ...
Usually answered in minutes!
168 Questions
89 Questions
84 Questions
92 Questions
60 Questions