Questions & Answers for: Yamaha XS2 setting up

Question about 1972 XS2

1 Answer

dead pw 50 and sad boy. bike was running but would quit every once in awhile and then we reved it up and quit like it ran out of gas. took tank off and cleaned took carb off and cleaned.have fuel and ...

Ad

Question about 1972 XS2

1 Answer

Gas air? The auto start for one dosent turn the bike over,, i had it running a couple times and it would die. I cleaned it up a little more and it went .02 miles and hasnt started since you closed the

Ad

i have a 1979 yamaha gt 80. Its not getting fuel. I have clean the carband replaced fuel lines but does not seem to be getting fuel. also what are the ports on the side of the carb supposed to be set ...

1989 Zuma, just rebuilt carb to OEM specs, turned air screw to factory setting, Removed gas cap in case not allowing air. Installed new spark plug. Scooter will fire and run for about 20 seconds then ...

i am rebuilding a 1972 yamaha xs2, the forks are rusted and need replacing. Can you tell me what size the tubes are? Hi there. The 72 XS650 uses 34mm OD fork tubes. You can easily get replacements ...

Question about 1972 XS2

1 Answer

i want to set my points on my yamaha xs250 twin do i set my left hand points then four cycles and set the right hand side Your points will fire on the combustion and the exhaust stroke. Motorcycles ...

yamaha 1979 GT 80 won't stay running set float cleaned carb new needle and seat bogs at top end Hi, Anonymous and the usual suspects are: 1. Inlet system air leak. 2. Enrichener valve not seated or ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...