my son just called to say he put diesel in the tank. He hasn't started it yet. Is there a drain on the fuel tank or does he have to siphon and then use rags to soak up the rest? Hi and welcome to ...
Question about 2004 GZ 250 Marauder
...valves??? the owners manual says to inspect the valve clearence but dosent tell you how. side note: is there anything (like any settings) to boost the proformance of this bike?? you use a set of ...
...then dies out all ports are clean i tore the carb a part 3 times what should the fuel|air screw be set at.it must be in the carb. It seems the carb/s flooding with fuel and thus it dies, try to
...Valves are to be adjusted and set on a COLD engine. Intake Valve .001 to .003 Exhaust Valve .003 to .005 As you can see this is not much of a lash...so normal wear will cause them to start making ...
Question about 2003 GZ 250 Marauder
...set your exhaust valves to on a 2003 Suzuki gz 250 Hi, Wayne valve clearance (when cold): IN. : 0.03-0.08 mm (0.001-0.003 in) EX.: 0.08-0.13 mm (0.003-0.005 in) For this scenario you will need your ...
Usually answered in minutes!
33 Questions
15 Questions
13 Questions
10 Questions
9 Questions
