Questions & Answers for: set stitches

Ad

...stitching with width at zero. How canI get a straight stitch Shark 384 Set it zigzag mode and set the stitch width dial (lower dial on right side) to zero. That should give you straight

Ad

stays in one place and won't move kenmore 12102 Make sure the stitch is set to a sewing stitch, (not a buttonhole stitch). Set the stitch length dial to a longer stitch. Make sure you have you feed ...

Ad

...stitches (14-25) set the length dial to "ss". (ss stands for stretch stitch, such as for #14 (three rows of straight dashed lines) instead of just sewing one stitch forward, the machine will sew back ...

My Kenmore sewing machine model number is 17630, & when I try to set the stitch length from a Straight Stitch setting to a Straight STRETCH Stitch setting, there isn't any difference. I have the ...

Question about 1725

1 Answer

...set to 2.5. If the machine has several different stitches then there may be a "stitch selector" too where you can choose the stitch style, ie zig-zag, 3 step zigzag, blind hem stitch etc. You could ...

Question about XR-65t Mechanical Sewing Machine

1 Answer

...stitches Check your stitch pattern because you most likely have machine set to perform a blind stitch. chane your pattern setting to desired stitch and make sure you use appropriate foot attachment ...

Question about XR-65t Mechanical Sewing Machine

1 Answer

...won't engage. It still sews in a straight line?? What's the model? Do you have the stitch selector set on straight stitch, or on a stitch with a width component, like a blind hem stitch? Some ...

Question about XR-65t Mechanical Sewing Machine

1 Answer

set to 0). Stitch maybe 4 or 5 stitches. Then move needle all the way to the left, set stitch length to very short (maybe somewhere between 0 & 1), width to slightly less than half, stitch forward

My Singer 6105 machine is stuck on stretch stitch setting. No matter what I change it to it continues to with that setting. Only in reverse does it do the regular stitch. It only stitches in the ...

I want to baste and dont know how to set straight stitch and length. To baste, set the stitch length as high as possible (zero is a non-stitch length, probably 4 or 5 on your machine is the largest ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1134 Answers

Chris Wetmore

Level 2 Expert

187 Answers

Marvin
Marvin

Level 3 Expert

84625 Answers

Are you a Sewing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...