Questions & Answers for: Meade how to set a quartz

set it to track the viewing objects. Any help would be greatly appreciated!!! You can send me an e-mail and I will try to help you as I have the very same Quartz Controller on my 20 year old 10" scope

10" Meade Fork, Quartz LX Pulse Drive Moved 10" SCT to Orion Atlas and am adapting twin 6" Objectives in a binocular arrangement to the old mount, sans the fork. Lost 12 volt adaptor and was wondering

...failure please unplug the unit from any power source for 30min and power it back if possible set to default factory setting and check its working.... Good

points in wrong direction. I set lat & long with GPS, polar aligned ok. GoTo controler says Saturn is below horizon, when I can see it in the sky above. Your TIME, DATE, and SITE, must be set ...

Is it possible to set up the meade telescope ds-2114ats-lnt to have it set up outdoors and view indoors. Set up remotely in other words. I have the cables and software to navigate indoors but still ...

When i initially set up my telescope how do i know that i set in the correct stars in the initial set up? They always pick the brightest stars for alignment stars. You will need to learn a few stars ...

set up autostar i have no manual & need to know how to set up autostar.... You can get one off the Meade web site here: http://www.meade.com/manuals/index.html Find your telescope on the above ...

First time using the mead etx 60at. I turned it on and set the date / time / enter. Then set it at north and horizontal,enter. It asked if i wanted the easy alignment, I said yes. I said searching. ...

I need to replace the main and the secondary mirrors of a Meade Starfinder Telescope with an aperture of 6 inches. Where could I get those accesories ?..... You have two choices. 1. Remove the mirrors

...inside the telescope instead of moving front part. Is there any way to fix it? The knob had a tiny set screw on the side of it-- that tightened down on the shaft. See if you can tighten it back up. ...