Questions & Answers for: HP PhotoSmart set number rings pickup

...rings to answer" number configuration limits are 2 - 3 - 4 - 5 rings. I need more. sorry, but that is the limit for the rings to answer function of the HP all-in-one devices. some people are ...

...Set up the HP All-in-One with a PBX phone system or an ISDN line. You do not need to continue answering questions. If you answered No, please continue answering questions. 3. Do you subscribe to a ...

Your fax machine has a setting for answering on a number of rings, normally between 1 - 4. Check it's settings and lower the number to meet your needs, so the fax picks-up before the answering machine

...set-up. One number(single ring) is the phone call number. The other number(double ring) is assigned to the fax machine. I have the problem that the fax machine rings on incoming phone calls after two ...

My recommendation is that you set the fax number to a dedicated line. If you need more assistance for automatic pickup, I can guide you through setup, if you can give me the model of your fax machine

...set it 2 rings lower than the all in one printer. Settings : Distinctive rings : 3 rings ECM : off Fax speed : medium auto answer : on - after checking this settings try calling your fax number.. if ...

number rings, the HP 2410 shows "connecting" for several minutes, but nothing more happens. After a few minutes, it says fax failed. Any suggestions? go to fax settings and change the fax speed to the

...line to one multi-ring line. The faxes aren't coming through now. Any suggestions? You will have to set the Multi-ring pattern in the Printer Fax Setup to distinguish between the phone ring and fax ...

set it to answer on any number of rings, but it's best to just set it to one. In this mode the machine assumes it has a dedicated line. If you have distinctive rings for various people in your home or

...Set the Rings to Answer setting to a high number to allow you to answer the incoming call before the HP All-in-One answers. Or, turn off the Auto Answer setting so that the HP All-in-One does not ...