Questions & Answers for: Epson Stylus set number rings pickup

...set this up. Can someone tell me step by step what to do? Any help would be appreciated! Thanks. Dani Hi , dial fax number send hear a sound from telephone ringing , sometimes voice answering machine ...

Set your answering machine to 4 and your CX9400 to 5/6 rings. Epson "Technical Support" has no clue of this problem .... yet. The machine routes the call to your answering machine, it it's an incoming

...number and stuffs), communication setting on the printer, drd set to all, ecm to off, v.34 to off, rings to answer 6 and dial tone detection to off. and answering machine distinctive ring pattern ...

set it up properly and tested it yesterday. It sent one and received one fax just fine. Today when faxes come in, it rings and rings and says incoming fax, but doesn't answer and receive. Where should

...set your printers rings to answer about 2 rings higher than these devices. > Auto answer on the control Panel of the printer should be on / enabled Note ::>> If still cannot receive a fax? try to ...

set the number of rings then (yep, you guessed it!) press OK Press the button for "Auto Answer/Space" (looks like a phone handset with the work "AUTO" next to it) to turn on Auto Answer Mode. Press OK

plain paper feeds no problem but photo glossy paper wont feed! (epson 830) Hi This looks to be a problem with the paper pickup roller. Hence use a little thin Photo paper or replace the Pickup roller ...

set fax to automatic = Y, number of rings to 7. Doesnt matter if I ring fax number or phone number the fax will pickup it up. You need to do two more steps.1. contact the phone company about distitive

...pickup roller usually has one or more rubber 'rings' around the roller to grab & feed paper by friction. If all else fails, open cover and inspect gearing to roller, broken brackets which can ...

...set of cleaning cartridges, try to clean the printhead by placing some folded tissue soaked with Windex under the printhead or forcing some Windex through the printhead pickup (using a syringe & ...