Questions & Answers for: how to set the idle

...idle is set when the choke is close to set the cam on the HIGH STEP. turn the car off hot, now pull the accelerator back and close the choke with your hand, now let the accelearator back to idle, now ...

Ad

Question about 22" Yard Machine Push Mower

1 Answer

...spring on top of the carberator. some units have an idle set screw also. if it has an idle set screw, turn it in untill it idles where you want it to, if it just has a spring, then replace the

Ad

Question about 22" Yard Machine Push Mower

1 Answer

...set the idle after I set (moving the distributor) the timing or how can I set the timing without advancing my idle. Thanks moving the distributor will alter the idle because it makes the engine run ...

Question about 1997 Mystique

1 Answer

...not the transmission, At idle in gear pull the plug on the idle Air control does it change in idle setting? If it doesnt change in Idle setting the adjustment that was use to control the setting ...

...set the other idle screw,  curb idle,  to the idle setting for your truck, probably about 700 rpm.  You can move back and forth between the screws to get the best steady idle.  ...

...set and idle for a while it starts idling up and down.any idea's? I have a 1990 S-15 with 4.3 motor idles high when you start, idles down , set and idle for a while it starts idling up and ...

...set idle on cbr 250 when engine won't start hi there you really cant set it properly as every bike idles differently,so you should get the motor running first were you can idle the bike with the ...

...set the idle speed by the idle speed screw with engine at normal operating temperature. Then you set the linkage up so the cam is on a raised step, throttle will be held on that raised step. then you ...

...or should the idling drop? thats what happens when you change the set screws,idle set screws will bring it to an idle,when you are at that 1st point,where it idles fine,stop,your idle set screw is ...

Question about 1986 C1500

1 Answer

...screw for engine idle speed, later models did away with the enrichment screw, to adjust set idle screw to 600 rpm, adjust air mixture screw to fastest rpm , reset idle screw to preferred idle

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...