Questions & Answers for: set comcast cable box

...set up to) the cable works fine. The comcast cable box has AV slots in the front and back, I've tried both with no success. I'm wondering if the problem lies in the TV or if there is some other sort ...

...comcast hd box except it is not a dvr http://broadband.motorola.com/consum...t6208_back.jpg. I have a toshiba Toshiba D-KVR20ku dvd/vcr recorder and a samsung plasma pn42a450p1d. I have hd picture, ...

Comcast says to set TV and VCR on channel 3 and use VCR remote to program recording but doesn't get results. Try this..Run cable line into VCR in, cable from VCR out to box, then cable from box to TV.

...Comcast Motorola STB's (Set Top Box) DCT 3412 / 6412 remotes did not support the new Hannspree 28" TV remote codes. Then I discovered the Hannspree TV remote was universal and had a button for Cable. ...

...Comcast HD Reciever, so I can still use my Phillips DVR/DVD functinoality, and get a clear picture? Try this set up- Use an RCA audio/video cable for this set up (Yellow/Red/White). Connect from the ...

set but also record through RCA or RF again will not allow for HD record unless its TiVo. Hope this helps IF Comcast cable box has component Outputs, then plug it in the Samsung DVD Recorder & VCR

...set up a Comcast connection (using a RNG 110 cable box). From what I can tell CC can be enabled through the cable box ? but then it is always on. And because of the use of HDMI the CC button on the ...

...set-top box from Comcast to a Sony TV and JVC DVD player. Installation diagrams from Motorola and Comcast show wall to set-top box, set-top box to VCR (not DVD), then VCR to TV. None of the diagrams ...

...Comcast cable boxes (or others), here's what you need to do: FIND MENU for AUDIO or HDMI setup on CABLE BOX or Satellite Box. FOR COMCAST 1. Turn on TV and have Cable box Turned OFF. 2. Press MENU on ...

...Comcast box has a composite output, you'll be able to record SD shows. Use RCA composite video and audio cables between the box and the recorder. You'll have to set the box to the channel you want to ...