...set code. 2. Within 5 seconds press the 1-2 key 3. Enter your personal 5-digit code. Each number mus be entered within 5 seconds of each other. 4. Doors will lock and then unlock to confirm that your ...
set code. 2. Within five seconds press the 1 � 2 on the keypad. 3. Enter your personal 5-digit code. Each number must be entered within five seconds of each other. 4. Press 1 � 2
...the code is on the module that is in the door. use that code to access all functions including setting your own
...set code. Either code can be used to access the vehicle. In addition, if a second personal code is programmed, it overwrites the previous personal code. To erase a personal code, carry out the ...
...set code. Either code can be used to access the vehicle. In addition, if a second personal code is programmed, it overwrites the previous personal code. To erase a personal code, carry out the ...
...set code. Note: The keypad and the interior lamps will illuminate when pressed. 2. Within five seconds press 1 ? 2 on the keypad to enter the programming mode. 3. Enter your personal 5-digit code. ...
...a start up misfire, pay attention to items which may expand or contract when cold (if the code sets when the engine is cold), or hot (if the code sets on a hot restart). If you have other
Question about 1998 Mountaineer
...set the code to your personal one. 1. Enter the factory-set code (keypad will illuminate when pressed). 2. Press the 1/2 control within five seconds of step 1. 3. Enter your personal 5 digit code. ...
...format your Nokia 2700 classic device by typing: * + 3 + call + Power on. Before the device is reset, you need to provide the lock code. The default lock code is 12345.If it is not working try
...set code. Either code can be used to access the vehicle. In addition, if a second personal code is programmed, it overwrites the previous personal code. To erase a personal code, carry out the ...
Usually answered in minutes!
1,305 Questions
689 Questions
627 Questions
646 Questions
630 Questions