Questions & Answers for: set clock kenmore gas range

Gas Range model: 790-78579405. First time usage for oven. All stove burners does work. Some blogs mentioned "reset" red buttom but couldn't find it from the back metal panel. Please help. Thanks! Part

...Kenmore model 790 Sounds like you overloaded a capacitor on the clock assembly. Before you replace the clock, you should check the voltage to your stove to be sure it's a steady 110 to 125 volts. But ...

I have a kenmore gas range model #790. When I turn on the oven, it won't heat up and smells of gas. The broiler and burners work fine. dont use it may blow you up bad gas valve and saftey sender

...clock pad is touched, as stated in the manual....but she wants it back on all the time My kenmore electric range model 790 bake element don't work ,and every time I try to use it only the upper ...

kenmore gas range - one rear burner has gas and a spark but will not go to full flame Model 790 7861850B If you can lift of the top of the burner check inside and clean if gunk or debries are there ...

how do I troubleshoot the clock board on a Kenmore gas stove model 790 clock board won't illuminate at all and none of the touch buttons work. does the oven light work ?

kenmore gas stove,oven is not heating properly. I set it for 450 it heats to 250 gas stove oven is not heating properly. I set it at 450 it only heats to 250. The model number 790 You probably have a ...

Kenmore gas range 790, not getting gas to the stove top, oven works, all 4 igniters fire when any knob is used. Is this a safety shutoff and how do I fix it? Burner Spark Electrode Replacement - ...

kenmore 790 gas range oven has no gas flow to oven, although igniter works fine. Would gas control valve be bad? 790-70402012 has an electronic igniter. The igniter glowed but the burner did not light

Kenmore model#790-78868800 After power outage, oven/clock control panel will not work, burners still light Could be an open fuse or loss of power at the outlet.