Questions & Answers for: RCA set clock

...set the clock whether the Unit is on or off. Note that the clock must be set, otherwise the timers cannot be set. 1. Press the SHIFT button. 2. Press the 1 CLOCK button. The ?CLOCK? indicator on the ...

set clock - you shouldn't need to set the time. The atomic clock bounces off of satellites all around the world. There is literally little to no "dead zones" for the clock, so you should never have to

set clock - you shouldn't need to set the time. The atomic clock bounces off of satellites all around the world. There is literally little to no "dead zones" for the clock, so you should never have to

set the clock. I have tried EVERYTHING!! How do I set the clock.! On the top of the clock, hit the set button one will show alarm 1 then alarm 2 then you will see a little clock symbol then hit fwd or

Set the clock on my RP4801A clock/radio That pretty much covers it. Following are the instructions for the RP5610 which looks very similar to the 4801A (that I also have). The only difference in the ...

...set the clock, and no directions come with it. Is there a clock? I push the button "clock" and the digits flash 12: 01but nothing changes the numbers. Hi, Follow the procedure to set time/ clock. ...

...set clock Hi there, Follow below procedures to set the clock.. 1. Press CLOCK until the time flashes on the display (12-hour clock for RCA, 24-hour clock for Thomson). 2. Press TUNING UP or DOWN to ...

...set the time Slide the Lock/Wake/Clock switch to the Clock position to enter the clock setting mode. Press REV or FWD to set the time. Press and hold to decrease or increase the time value quickly. ...

...set the clock Hello To set time do the following. Setting Clock 1. Slide the switch /WAKE1/WAKE2/ on the top of the unit to clock position. 2. Press REV or FWD to set the clock time. The time ...

...Set Time to enter the clock setting mode. 2. Press HOUR+ and MINUTE+ to adjust the time. • Press and hold to adjust the time value quickly. • The digits on the display ? ash in clock setting mode. • ...