Question about FLM-3732 Television
...the remote has a button for inputs a menu comes up and make your selection from there for the right input that you have connected to the tv most menus have TV (air) HDTV (air) video 1-6 HDMI and ...
set on my S-video input so i only need over the air when the sat is down (i.e: storms, wind, snow, ...) TRY TO WATCH TV ON POLAROID 19"TV TLA-01911C /can I watch tv without a converter or how do I set
...air antennae. We've tried 3 different antennaes trying to fix artifacting. This, we're wondering has more to do with the in-set tuners than with the antennae, because our new Sony 26" works almost ...
...set up menu and set the signal input to AIR, the rescan for channels. Directv should have been going into a sat box then into a different input than the Ant jack so make sure your on the right ...
Question about FLM-3232 Television
...air HDTV channels What am I doing wrong? This model has the ATSC tuner so it should receive those HD channels. Whenever I try to scan for them my TV makes noises then goes blank. Help! There is no ...
...air and then put the TV on the channel it shows after selecting done to save the settings.If you can provide more information or have any other questions let me know!Tommy FaustDISH Internet Response ...
Question about 322 DTV Receiver
...Air/Cable item is set correctly. Then the Channel Search option is on the next line. This is the method for the LCD2050. For the TTM2901L, you need the same Channel sub-menu but the channel search is ...
Question about FLM-323B Television
...AIR connection and try to access the HDTV setup from the menu, the menu screen goes away and the remote no longer works until I manually shut the TV off. I can not set up the HDTV stations or receive ...
Question about FLM-323B Television
set up is Cable/Air. I have a normal outside aerial Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to
Question about FLM-323B Television
...set for Cable or Over-the-Air as needed. Press Enter to change this using the Left/Right arrows. Press the Down arrow to get to the Auto-Scan option and press Menu to launch the scan. Often, the ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions