...serger, part way through serging a piece of fabric, seemed to slow down and as it slowed a thumping noise came from the machine, becoming progressively louder until the entire machine stopped. The ...
serger runs fast at first but after about 3' it starts slowing down. If I stop and let it sit a few minutes, it starts fast again then slows down. Is there a problem with the motor maybe? Please help,
Question about Eclipse Serger
...slow sewing stops lock not sewing Print Email Flag Problem with Baby Lock Eclipse Serger I have a Baby Lock Serger BL-90. When it has been on for a while and I'm sewing, it starts t I have a Baby ...
Question about Eclipse Serger
...slow down sewing and then stops. I have a Baby Lock Serger BL-90. When it has been on for a while and I'm sewing, it starts to slow down sewing and then stops. may need cleaning. you ...
Question about Eclipse Serger
serger motor slows down after sewing 20 minutes. Why? I have a baby lock pro line. After sewing for awhile, it will start to slow down. If I go do something else for a bit, the machine will work again
...serger will sew for a while then slow down and stop completely. Your serger needs service. (clean, oil, adjust, etc.) It may be that the motor is not lubed well enough and as it is being run it ...
...down Serger starts fast and then slows down after sewing a while. it could be the motor or the power cord or the foot pedal, check to make sure the power cord and the foot pedal are ...
...serger is running too fast. How do I slow it down? If machine speed is not controllable with your foot controller, you probably need a new controller. These items should be covered by a 2 year ...
...serger was giving off a burning smell and slowed down to a stop. I took it in to get it repaired and was told it just needed cleaned and oiled. After the maintenance I was told it would run like it ...
Question about Juki MO-644D 2/3/4 Thread Overlock Serger JUKI010
...slow down a serger in a sewing factory It goes pretty fast then all at once it slows down is there a switch the mechanic uses to do this Check the pulley on your motor. Sometimes thread gets wrapped ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions