Questions & Answers for: Dodge Ram 3500 sensor

...filter as well. you will find wiring going to two solenoids side by side. follow harness to other sensor. single solenoid which is located on governor. there will be a square sensor on side, should ...

Ad

Question about 2001 Ram 3500 Truck

1 Answer

...P2000 NOx Trap Efficiency Below Threshold (Bank 1) This code usually indicates a faulty oxygen sensor(s). However, in some instances it can also be used for a faulty catalytic converter as well, ...

Ad

i have a 2001 dodge 24 valve diesel and need to replace the cam shaft sensor, i bought the sensor but cant find where it is on the motor. where is the cam shaft sensor located on the motor? it is ...

...cut off and won't start but if try next day it does the same thing sounds like a senor either tps sensor or oxygen sensor the tps sensor or O2 sensor can cause the truck just to shut off like that? ...

Where is the Crank Position Sensor located on a 1997 Ram 3500 diesel P/U? REMOVAL & INSTALLATION All Except V-10 Engine Remove the air cleaner assembly if necessary for access to the sensor. ...

Question about 2004 Ram 3500 Truck

2 Answers

what is the senor 2 referred to in a 04 dodge deisel 1 ton in reference to the throttle sensor throtle position sensor usually located in the untake system near air box In the 04 Dodge, the TPS is ...

...P1693 A code P0500 may mean that one or more of the following has happened: 1.The Vehicle Speed Sensor (VSS) is not reading (functioning) properly 2.There is a broken/frayed wire leading to the ...

2001 dodge 3500 van cam position sensor location 2001 dodge 3500 van cam or crank position sensor location with the 5.9l 360 v8 motor. Crank sensor is in the bell housing of the transmission. Cam ...

how does the 2004 dodge ram brake master cylinder low level sensor work? (detect fluid low level) My Brake light is on as the sensor has broken out of fluid housing and is now unplugged, can I jump ...

Question about 2004 Ram 3500 Truck

1 Answer

...weather,will start easy if pluged in,has code p0113 DTC P0113 is Intake Air / Charge Temperature Sensor High, Check wiring to the sensor and if that is good then the sensor may be dirty or bad.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...