Questions & Answers for: Nissan second

A/C (Magnet clutch always works) I have a problem with governing the air conditioner on Xterra 2003 SE. Under any position of the button OFF/ON air conditioner on console ,the air conditioner ...

service engine soon My light Service Engine Soon in on. How I can get the code run to know what is wrong? You have to time this perfectly or else it won't work. Turn ignition switch on, after 3 ...

...from Diagnosis mode 1. Turn ignition switch ?ON?. 2. After ?AIR BAG? warning lamp lights for 7 seconds, [i.e. when it stops running solid and starts flashing] turn ignition switch ?OFF? within 1 ...

...the nissan scan tool. Make sure to follow all steps and it it best if you use a watch with a second hand. 1. Perform "Accelerator Pedal Released Position Learning". a. Make sure that ...

...first time, while Driving my 2000 Nissan Maxima SE at around 50 mph, the engine got sluggish for a second and then the overdrive light came on for a couple seconds and then the od light went off and ...

...the brake, or the clutch, otherwise the engine will start. After it is in the ON position, count 3 seconds. Now, within the next 5 seconds, you need to floor and release the accellerator pedal 5 ...

how do you beed the fuel line on a 1996 nissan quest You just turn the key to "ON" and the fuel pump runs for 5 seconds. Excess feul and vapor go back into fuel tank. Turn key off for 15 seconds ans ...

looking for adaptor to scan trouble codes 1990 maxima v6 How to read the engine codes without a Nissan CONSULT or scan tool. (Set ECM in Diagnostic Test Mode II) Confirm that accelerator pedal is ...

how do i get my engine oil light reset i just had my oil changed n it just blinks Folow these steps to make the check engine light disappear: 1. Put the key in and switch it to the ON position, but ...

trouble downshifting I have a new clutch. I have trouble downshifting from say third to second when slowing. Does not want to engage. If it only happens between third and second, it could be the ...