Questions & Answers for: Chevrolet Cavalier seals

Question about 2003 Cavalier

1 Answer

left front axle seal can you tell me what tools i need to replace my seal This is a fairly involved job. You will have to remove the brake assy, then seperate the ball joint and remove the axle assy. ...

Ad

...reverse. once in, then it is fine. is it too much fluid or a vacuum issue? The clutch plate apply seals have hardened and are not sealing to well. Other than a rebuild to fix, you might try some ...

Ad

...a 97 cavy with a known bad A/C compressor, but i want to rebuild it, can someone help me find the seals and gaskets to do such? the pump is still good and makes fine compression during action the ...

...for 93 chevy cavalier Remove the fuel rail along with the injectors attached to it. Remove the old seals. Clean the injector are very well with a solvent. Apply Vaseline to the seal mounting area on ...

My car is resisting acceleration and I know it is a seal that is broken, which seal could it be? what seal are you talking about?in all my years as an engineer i never heard tell of a seal holding ...

Question about 1997 Cavalier

1 Answer

a dripping water pump Your seal has gone bad on the pump. Your best bet is to remove the pump and replace the seal and the pump. This will fix your problem. You have to replace the pump because if you

...Usually, there is a seal between the engine and transmission that goes bad. There are a lot of seals that hold oil in the transmission. The most common problems are the front transmission seal

Question about 2003 Cavalier

3 Answers

2002 Pontiac Sunfire GT. 2.2 Litre Ecotec Engine. Concern: Front Seal is leaking. Question: Does the engine need to be pulled to replace the seal? No. The crankshaft pully can be removed through the ...

How to change a torque converter seal on a 2003 Chevy cavalier I believe you want to change transmission input or "front seal". It's a matter of pulling transmission and with a seal puller yank seal ...

1996 Cavalier code P1887, Check engine comes on when cruising 60moh or faster. The car jerks and then resumes with no problems the problem is the pump seal is leaking. there pretty common for that. ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...