Questions & Answers for: Hotpoint seals

Question about WMA58 Front Load Washer

1 Answer

changing front loader seal how do i get into the machine to change the door to tub seal easy.isolate from mains. take top off.remove clamp that holds seal to cabinet and unpeal seal from cabinet. seal

Ad

Question about Aquarius WF000 Front Load Washer

1 Answer

Replacing door seal existing door seal black and mouldy Try washing the seal with jiff and a scouring pad in warm water.Depends on how well it is ground in.You may have to replace with new seal. ...

Ad

Question about Ultima WF860 Front Load Washer

1 Answer

wf860 door seal How I do I remove and replace door seal with a new one Thanks un-plug the washer take the lid off now open the door undue the clasp that goes around the rim of the door seal on the ...

Question about Aquarius WF000 Front Load Washer

3 Answers

Door seal fitting for front loading washing machine. Hi. Just got a new door seal for our Hotpoint WF541P front loader washing machine and I'm not quite sure how to fir the new seal. The old on is in ...

Question about WMA46 Front Load Washer

1 Answer

WMA46 Door Seal How do I change the door seal. turn off at mains remove clamp that holds door seal to cabinet. peel door seal off cabinet. remove worktop undo clamp that holds seal to tub. pull seal ...

Question about Ultima WD72 Front Load Washer/Dryer

1 Answer

...the retainers back. the inside can be made easier with the application of some soapy water in the seals groove that the inner retainer sits in. good luck as it can be easy or difficult doing the ...

Question about Aquarius WF000 Front Load Washer

1 Answer

fit new door seal How do I fit door seal on hotpoint aquarius WF000 For most front-loaders: Plug off the wall mains. Remove the plastic clamp holding the seal to cabinet & peel off the cabinet. ...

Question about BWM12 Front Load Washer

1 Answer

...pull top backwards and clear of front facia then lift top off ok ? now you have access to the door seals clips which secure seal to front panel and the outer drum loosen screws fully this releases ...

Question about Ariston Aquarius WD420 Front Load All-in-One Washer/Dryer

1 Answer

door seal needs to be replaced i need to replace the door seal on the hotpoint aquarius wd420 washer/dryer not sure how to remove/replace the old one For most front-loaders: Plug off the wall mains. ...

Question about Aquarius WD63 Front Load Washer/Dryer

1 Answer

hotpoint aqurious leaking at front underneath,concrete block wet at front towards door,alot of water coming out,any ideas thanks.david Carefully check the door seal for any sign of a hole or tear in ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machine Experts

vince

Level 3 Expert

2530 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Paul Carew

Level 3 Expert

3808 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...