Questions & Answers for: Cobra seal 150

cobra gtl dx 150 brakes up whe tx audio is clipping due to improper setting amount of modulation. should be set at 95% retune it ...docs cb shop ny

cobra 150 gtl? when on high power the modulation is very lou. outher then that the radio works very good RV12 is the modulation adjust for the 150. Check with cbtricks.com for physical location.

what size fuse do i use on a cobra 150 gtl dx power cord please get back to me 30 should be enough to run it at optimal level.

fuse size what is the fuse size for a cobra 150 gtl dx cb radio I believe it's 2.5 amp,but you could get away with a 3-5 amp.

about a cobra 150 gtl dx hi i just bought a cobra 150 gtl dx from a buddy he only used it once or twice and then bought a magnum s9 anyway i hear these radios had some issues what all do need to have ...

need a new Cobra 150 GTL DX power,vol,sqlch pot Where can I find a new volume pot for a Cobra 150 GTL DX ? I searched the web for this part without any luck, looks the cobra 29 NW LTD is about the ...

Cobra 150 Lights up,and receives but does not Cobra 150 Lights up,and receives but does not transmit. I know this is going to sound stupid but if you hit or should I say tap ot it will it transmit. If

(I have a COBRA TIG 150) the screen weld, showme the folow: Current weld program was sealed during last weld. Each level may have doferent sealing factor associated with it. You may want to save this ...

COBRA 150 WILL NOT TRANSMENT WHAT IS THE MOST COMMON NONE TRANSMENT PROBLEM WITH COBRA 150 forgetting to turn it on. making sure its in CB not PA mode.turn squelch all the way to left and rf gain to ...

can you still get the 150 GTL DX or has it been replaced with the 29NW? Cobra 150 &200 were amateur radios. and are no longer made. so thats totally different than a 29.