Questions & Answers for: sd cards limitation 2gb

...limit to what this camera will handle? The A430 works with MMC and SD cards. Your 4GB card is actually an SDHC card and will not work with this camera. You need to use SD cards, which max out at

...SD cards. This problem happens consistently with my 4gb or more cards, but with no SD card or a 2gb it works fine (even to the point that if you remove the large SD card while it is erroring, it will ...

...SD cards up to 2GB. As you rightly point ot the physical charactreristics are identical, its the internal format of the card that defines SDHC. Standard SD cards use FAT - which has a 2GB limit. SDHC ...

...The camera only supports SD memory (limit 2GB), not SDHC (4GB and more). The manual claims up to 1GB guaranteed, though the camera recognizes my 2GB card card. You may need an SDHD card, not the ...

...SD cards, which top out at 2GB. Cards bigger than that are technically SDHC cards. While SDHC cards will fit into SD slots, they will not work. SD cards will work in SDHC devices, though. So, you're ...

...c330. The C330 uses SD and MMC cards. SD cards are limited to 2GB in size, so that's the upper limit. Cards bigger than 2GB are technically SDHC cards. They will fit into the slot but will not

...memory limits? Only a 2gb standard SD seems to work. Any input? The Z6 works with SD and MMC cards. It does not work with SDHC cards at all, whatever their size. SD cards are limited to 2GB in

...to SD 2GB? or will an SDHC work? The DX6440 uses SD cards. While SDHC cards will fit into the slot, they are electronically incompatible and won't work. You are limited to SD cards 2GB and

...SD cards but keep in mind that SD cards only go to 2gb anything bigger than that are SDHC and are the same size but designed differently so the reader must be able to read SDHC format. Note if your ...

...SD cards, still were SD, but 2Gb was the limit for the FAT 16 and 32 format and for the normal SD cards. The same happened with the hard disks. They developed the SDHC card, and made the new hardware ...