...scsi-2 (50 pin) to my usb hub. What connector(s) can I use? I'm so confused with all the DB. . HD. . . etc. I find something that I think will work, then I see "not for scanners". I'm just totally in ...
...68-pin wide SCSI and 50-pin FAST SCSI connector yes Battery: 3V lithium battery Green Function: Yes Connector: IrDA, Wake On LAN, SB-LINK,Wake On Modem Board Size: 244 mm x 305 mm, ATX form ...
Question about Digital Science 3520DP Path-Through Scanner
scsi 50 pin cable on btoh ends.Is there a converter that can be attached so that i may connect to my PC? my pc does not have a 50pin connector. so i need (i Guess) a converter that will go from the 50
Question about QuickScan 35 Plus+ Scanner
...50 Pin SCSI from Minolta QS 35 to USB connectors ? I have an old but usuable Minolta QuickScan 35. I'd like to hook it up to my iMac running System 10.4.11. Is this type of connector available? Do I ...
...50-pin SCSI port on my Alps MD5000 to my Mac which only has USB and Ethernet ports. There are no OS X drivers for the 5000. If your version of OS X is old enough, you can run the )S 9 driver under ...
Question about 2GB Printer Drive (SCSI-50PIN) (HFW7030D) -25797 (HFW7030DC) Hard Drive
...50 pin adapter to usb to get my files i need a 50 pin adapter to usb to get my file out of the drive it is easier to use the ribbon cable open a desktop and piggyback your drive. USB to a drive needs ...
...You would need a USB to SCSI (50 pin Centronics) adapter. That would get it connected, but i don't you are going to find any software or drivers that will then see the scanner so you could use
Question about 2GB Printer Drive (SCSI-50PIN) (HFW7030D) -25797 (HFW7030DC) Hard Drive
...50-pin hd from my old mac. Anybody got a solution? There are two ways of retrieving data from a SCSI hard drive. 1. Connect the SCSI hard drive to a different SCSI connector on the same data cable, ...
SCSI 2 (50 pin) interface. It should look like the one here: http://www.amazon.com/Cables-Go-03564-SCSI-2-Cable/dp/B000051312 . There are SCSI to USB converters but I'm not sure if you need a specific
...50 pins. The drive is already connected to 25 dsub port via LaCie Tsunami (Name of product). I can connect it to a 25 pin to a 9dsub and from there to a USB. At first the device would not be ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions