Questions & Answers for: screws for stand

Question about Televison & Video

6 Answers

...stand is. Inbetween the screws is a metal handle that pulls out. These four screws need to be removed and the metal handle pulled out. Then the TV will come off the stand. Just figured it out. It ...

Ad

Question about 42LC2D 42 in. LCD HDTV

2 Answers

...the bottom of the TV. there should be some screws (4-6) for the stand-usually the stand screws location are illustrated on the user manual- have a quick look on the net for a pdf which has the

Ad

screws of the stand and try to remove the stand, if you cant you will need to remove the back cover of the TV and then you will be able to remove the stand, remove the broken screw and put it all back

Question about AL2423W LCD Monitor

2 Answers

...stand screws ACER AL2423W LCD monitor stand screws I sent the monitor in for warranty repair and they said not to send the stand. The screws to attach the monitor got lost and I can't figure out what ...

Question about LT32HVM 32 in. LCD Television

2 Answers

...screws out of back of stand on my Olevia TV, but still can't remove stand so I can hang TV on wall I just wrestled with this problem. The screws were backed all the way out but I could not remove the ...

Question about LT32HVM 32 in. LCD Television

1 Answer

...we can provide a screw size. Another solution is for you to try to reach the dealer that supplied the TV stand to you, so as to get the exact screws that came with the stand. Take care and good ...

Question about REGZA 52RV530U LCD TV

2 Answers

...stand screws. The jack pack cover can be removed without tools. 3) Remove the four screws shown in the diagram below. This will allow removal of the pedestal stand. 4) Once you have removed all four ...

Question about LA40A450 40 in. LCD TV

1 Answer

...screws that came with the tv base stand wright?U have a Phillip screw driver wright?Just put the base stand into the tv make sure all the screws holes lines up between the tv and the base stand ...

Question about LA40A450 40 in. LCD TV

4 Answers

Stand Screws I own the Vizio E321VL TV and I need replacement screws to assemble the stand. I have a M420VT Vizio TV.  I used (4) M6-1.0 x 16mm screws to attach the stand to the TV stand adapter.

Question about LA40A450 40 in. LCD TV

1 Answer

...Tv to stand? Should be 4 screws that hold the stand into place. There is usually either a difference in the screws or some other identifier at the screw hole that differentiate from the other

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Are you a Televison & Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...