Questions & Answers for: screen small projector

screen remains small, only filling the center of the screen. Can't find a way to increase the projected area to fill the screen. Dislay options and Fn/LCD buttons don't help. Is there something on the

SMALL ICON APPEARS ON THE SCREEN (TOP L/HAND CORNER) USUNG A TOSHIBA PROJECTOR MODEL TLP X3000 AND WHEN WE USE THE REMOTE TO MAKE THE PROJECTORED IMAGE LARGER A SMALL X IN SIDE A SQUARE (ICON) APPEARS

...small inlet screen on the bulb unit 75 percent blocked. The projector is installed in a ceiling environment in a small room, exposed to mild dust. I'm assuming that's what made the bulb fail early. ...

...Screen Image too small when shown through LCD Projector A teacher hooked her Dell laptop (running Windows XP) up to an Epson Model EMP 8 LCD Projector. The image did not fill up the whole screen of ...

small dots on complete screen, like sky with stars, Place a white piece of paper about 1000mm in front of the screen and focus the image sharply. Choose menu, image, advanced then select color manager

...small enouhg to fit on our Theatre screen the further away you take the projector the bigger the picture gets You can go to the Vivitek website and they have a handy distance calculator to help you ...

How you can fix blue light problem on NEC projector? Shahid what does the blue light problem look like on the screen. is it all over the screen, or small dots, or a dim haze etc?

...screen has been darkened on a angle Ok I guess you have an optical mirror chamber error sounds good doesnt it but can happen if projector has been knocked or dropped in the optical engine there is a ...

the projector and you will see a small screen attached to the lamp and a Flex Cable attached to the screen, Remove the cable and Clean it with Alcohol Liquid from both sides then put it back and check

...screen will go blank and in the corner a small window says Analog RGB Searching. it will blink several times and then stop on 1024 x 768. HP vp6120 Projector problem projector will come on and work ...