Questions & Answers for: Radio Shack scanners

I TWON'T MOVE. IT SAYS ALL CHANNELS LOCKED OUT. NEED HELP If all else fails you can RESET or INITIALIZE the scanner to bring it back to normal operation. To RESET: - Power the scanner OFF - Power the ...

scanner says WIRED when i turn it on, and it won't do anything A RESET may clear the problem, but it will also erase all frequencies and data that you've programmed into the scanner. To RESET the ...

all channels are locked out. how do I get them unlocked If all else fails, you can RESET or INITIALIZE the scanner to bring it back to normal operation. To RESET: - Power the scanner OFF - Power the ...

my pro-2096 does not display any letters or my pro-2096 radio shack digital trunking mobile/base scanner does not display any letters or numbers. the light does come on only. If all else fails, you ...

MY 2096 BASE SCANNER READS ALL CHANNELS LOCKED AND I CAN'T UN DO IT AND OPERATE NORMAL. HOW DO I CORRECT THIS PROBLEM? If all else fails, and it sounds like it has, you can RESET or INITIALIZE the ...

how to clear all my frequencies from my portable scanner To clear all information that you've programmed into the scanner you can perform a RESET to original factory settings: 1. Turn off the scanner.

Scanner problems Its stays on Auto-Scann and buttons dont work None of the buttons of the scanner works and it remains on auto-scann. It changes frequency, every time people stop talking Resetting or ...

looking remove all stored channels from scanner and start over. Initializing the scanner will erase all programmed information and return your scanner to its original factory settings. To initialize ...

Can,t get scanner off all channels locked mode Please try this!! You may need a soft or hard reset. Here's some reading and instructions. Please use this first! resetting your scanner 1. Turn off your

radio shack pro-96 scanner screen blinks and loss of audio If the scanner's display locks up or does not work properly after you connect a power source or install batteries, you might need to ...