...Well in order to tell if its a fuel sending unit problem or the gage in the dash you must have a scanner.There is a 50% chance on both of them,unless you have a friend with a scanner you cant
Question about 2003 Sonoma Extended Cab
My rear right signal light and break light are not working. i changes the bulb, but no go, only the lights come on. Hmmmm, I would check to see if connecting an individual earth wire would help here, ...
i installed a new multy function switch and every thing works but the turnig signal but in the fuse box on the side drl fuse is not in but im not sure what that is? The drl fuse is the daytime running
Headlights won't turn on .Checked the fuses ,which are OK. Tried to see if the "highbeams" would come on. They don't. The highbeam indicator lamp does not come on in the dashboard. The turn ...
how do you change theheadlight lightbulb in the 1999 gmc sonoma? open the hood and you should find two pull straps at each end of the headlamp ,pull and the whole lamp assy will come out and then ...
...IS THE ENGINE COOLANT TEMPERATURE SENSOR, YOU WILL NEED TO VERIFY PROPER OPERATION WITH A LIVE DATA SCANNER, BEFORE U TURN IT ON IN MORNINGS OR COLD, COLD ENGINE LOOK FOR CTS READING IT MAY READ -40 ...
Will an OBD scanner tell me if the timing chain is stretched allowing my vehicle to jump time? no it will not because the chain is a machanical part only way to check is to remove it and to ...
Dash lights out what's wrong Dash lights out what's wrong Possible that the FUSE has blown but if the park lamps are working then the fault can be within the dash circuit. This can be a connector ...
Question about 2002 Sonoma
2002 GMC Sonoma, is there a way to disconnect auto lights, just turning them off doesn't work. Truck will just shut off going down the road, have replaced steering column and brain, all lights everyth
Usually answered in minutes!
403 Questions
359 Questions
270 Questions
269 Questions
249 Questions