Questions & Answers for: Chevrolet Silverado 1500 scanner verifier lampe

Question about 2003 Silverado 1500

1 Answer

...Most GM's can be programed to accept up to 10 keys.Some vehicals must be hooked to a diagnostics scanner to relearn the system. I am hesitant to post the learn procedure here for all to see! Have ...

Ad

Question about 2001 Silverado 1500

3 Answers

cargo lamp on message stays on The cargo lamp on message stays on. The dome light doesn't work now either. Verified that the cargo lamp is not on and the the dome override button isn't deppressed. Any

Ad

Question about 1999 Silverado 1500

2 Answers

...and have them do it. What will happen is you wont be able to position it correctly without a data scanner. You don't set timing on these like an old truck. You need to cam sync it which requires a ...

Question about 2003 Silverado 1500

2 Answers

...an O2 sensor or any condition that would set a Diagnostic Trouble Code (DTC). You need to borrow a scanner in order to find what code(s), if any, are being set. You would be looking for something ...

Question about 1999 Silverado 1500

1 Answer

...Startups. Your best bet is to get a free scan from Autozone or Oreillys and proceed with what the scanner indicates it needs. You can contact us with the Code number and we will be happy to advise ...

Question about 1999 Silverado 1500

1 Answer

no brake lights Start by checking the fuses, if the fuses are good check the brake lamp switch and check the brake lamp bulbs, check power and ground to the lamp circuits.

I have and 09 Silverado and the driverside rear parking/driving light does not work, the brake and turn work fine. Is there a fuse for that??I have changed the bulbs. There is a module in the back, ...

Question about 1999 Silverado 1500

1 Answer

what controls the inside interior lights when doors are open the inside lights doint come on Voltage to the coil of the courtesy lamp relay, dome, reading lamp, courtesy lamps, cargo Lamp, instrument ...

code p025a fuel pump module tested relay it is good why is there power on # 85 with key off DTC P025A: Fuel Pump Flow Control Module Enable Circuit The engine control module (ECM) supplies voltage to ...

a/c blower motor works if I pull power and plug back in until I cut engine off. Then I have to repeat process Daryl, You may want to check the blower relay/ just switch with one of same type and try ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...