Questions & Answers for: Minolta scanner verifier lampe

...times, then repeat, and the screen will read "lamp source fail." Any suggestions? Thx Replace the Scanner- Increasingly there items are 'No Repair. Though a check on the Minolta support may be a ...

error code c0500 I have a minolta di351 copier scanner and printer. It recently started giving me th above error code. The light is flashing on the second paper drawer down as well. open back coever ...

showing c04 problem Scanner lamp is not working no cods? can you take lamp out ? check with aom meter .sould have coninuity hope that help try also to check the thermal fuse of the exposure ...

THE UNIT CARRING THE LAMPS IS NOT MOVING AS USUAL. If there is no light coming from the lamp in the scanner and the carriage is not moving this is a serious problem. It could be that the main board is

code c 0200 minolta cs pro ep 2050 A c0200 deal with the scanner. You may have a blown scanning lamp. Dose the scanner find HP & does the scanning lamp turn "ON" it could also be the Lens HP. Was this

At startup the Minolta 1031F as a flashing C 50 on the screen Verify the continuity of the fuser heater lamp.90% the lamp is open.You need change the fuser lamp and the fuser roller(the heater lamp is

I have a minolta 4050 that is showing a 601 error code SC 601 = SCP board PWB J malfunction or scanner motor malfunction.Scanner motor located in rear parts right side and the PWB J panel in the right

...the hole in the frame at the left front side of the copier and remove the screw that secures the scanner unit.Move the scanner to rhe right hand side of the copier.Remove 3 screws to free the ...

how to remove c06F6 after doing one copy the exposure lamp stop and appear the code C06F6 Replace the lamp or the circuit board that controls the lamp also check the scanner cables and sensors

...4000 after doing one copy then the exposure lamp on its origin position and appear the said code Scanner issue have the scanner looked at mite have a bad cable or exposure lamp circuit ...