Questions & Answers for: scanner not ready

...scanner the ready light blinks green then settles on Red. Sofware says to remove paper in scanner. There is no paper in the scanner and everything appears to be normal. I have another scanner just ...

...scanner coming ready. A lamo that does not light indicates that the lamp itself is dud or the AC inverter that powers the lamp assembley has had it. ...

...the scanner driver do not plug in the scanner yet!. Once it has finished installing, re-connect the scanner USB lead. Windows should install the drivers and tell you the scanner is ready to

...Scanner ready green ready light is constantly blinking not going to steady green. Also under scanner no driver is listed. Fujitsu Scan Parnter 15C. This is scanner which has been working is not. ...

...ready' on the scanner display... this is rather urgent, the scanner playing a key role in my business enterprise... any help would be appreciated, thanks These type of scanners use multiple ...

...READY ) BUT THE SCANNER DOES NOT WORK OR SCAN. OUR SCANNER IS CONNECTED BUT DOES NOT WORKING. DOES NOT POWER ON THE "SCANNING LAMB" NOW THE TWO GREEN LIGHTS ARE FLASHING ( POWER AND READY ) BUT THE ...

...and is ready toi use, re-connect the scanner USB lead. Windows should re-install the drivers and tell you the scanner is ready to use................hopefully! Which version of WIndows are you

ready to scan even after 10 to 15 attempts. Kindly suggest me. hi rakyansfi, Is that scanner old?because lamp has its own life span. it cannot scan if the lamp is insufficient power or light. regards,

...scanner panel indicates that the ADF was opened when the status was ready("1"). To return to ready("1") status, close the ADF. If the display doesnot return to ready ("1") after closing the ADF, turn ...

ready. when you remove the scanner upgrade kit, the machine powers on to ready, and you can use it as a copi Isolating scanner kit, machine works. Putting it back causes the error message to reappear.