Questions & Answers for: Toshiba scanner lamp adjustment

lamp on the scanner. That usually takes care of the problem. HI if this is a Toshiba copier the C26 relates to the exposue lamp you can check by looking at lamp when the machine is turned off and then

lamp turns on...if it turns on and the turn off its ok. Now clean your white reference guide..it's located under the glass..need to take off exposure glass and clean under it..especially a white strip

...810 says call for service when check the cue references C26 check to see if lamp lights. if not, replace lamp. if lamp lights, pull the platen glass and replace the scanner board under cover by

lamp assembly and look at the small square glass window that the light shines into. It should be clear and clean. If it is not, clean it gently with isoprophonol alcohol or screen cleaner. By the way,

I have a Toshiba Rear Projection 51H83 & I think the lamp needs to be replaced. I was trying to find the lamp part number & how hard it is to replace. On a scale of 1 to 10, 10 being the ...

...clean the scanner lamp and scanner reflacters... when you clean it your copier copy quality much batter.. (BUT VERY CARE FULLY DONT DAMAGE EVERY THING) PLEASE VOTE ME .. Thanks . Best

...how are you i hope you are well this is jack ..my personal ID.. ([email protected]) C26 Error is scanner error please check the scanner unite 1 scanner lamps. 2 scanner strip. 3 scanner bord 4 LGC ...

scanner ? If the lamp or mirrors in the scanner are dirty, or hazy, that will cause the problem you are having. And yes if they are clean them most likely the lamp is bad. But try cleaning the scanner

...Best Regards, Amir Abdi If you try to copy, can you see the scanner light moving across? If not the lamp has failed. If it always works first time, that could be a failing lamp or a poor ...

how do i fix my toshiba studio 202s,double image result change uhr,drum,remove scanner and put to other unit, same problem result If you have replaced all that, check your drum cleaning blade and your