Documate 252 scanner When I scan a 40 page or so document, the first 5 or 6 pages scan OK then they start getting darker and by page 15 or so, they are completely black. Buy a used Canon high speed ...
...exposure lamp in the scanner is not being senses. Open the scanner and see if the lamp comes on. If not, most likely the lamp has failed. If it does come on, then the sensor or processor have
Question about WorkCentre C2424DN All-In-One Laser Printer
scanner. Not much to check, it is a lamp issue. You can try disconnecting the cables to the document feeder and scanner. The one on the right side of the machine, where the power cord, thats is odd to
...lamp coming on? 2. Shut the machine off and disconnect the cables from the scanner and document feeder, reconnect them and turn it back on. If that is not it, A service call is the best thing to do, ...
...must be activated when the scanner is initialized. Finally, when the copy button is pressed, does the lamp on the scanner come on within a few seconds? If not, the scanner lamp may have failed. ...
...scanner. The lamp carriage is gettiing hung up on something or a cable has broken or popped off a pulley. What I have seen most of the times, is the lamp carriage is hitting the sensor that tells the ...
...lamp locked. Where to look is on the botom of the scanner. Look in where you remove the copies, on the bottom of the scanner you will see the only green part there, it is about 2 inches long and a ...
...turn on scanner it says "scanner warming up" (no problem ;)) after normalize cameras - failed - scanner warming up - normalize... over and over again. What's the problem? Lamp is new - have one
error e3 xerox documate 632 scanner ADF lamp check error
How to Solve U2 problem in Xerox workcentre 5016? Replace scaner flat cable 1. Scanner. Cable clean 2. Scanner sensors clean 3. Scanner lamp and Morror clen 4. Machine power check
Usually answered in minutes!
534 Questions
436 Questions
284 Questions
267 Questions
262 Questions