Questions & Answers for: Umax scanner lamp

...a 1/4 inch wide. It scans ok but is overshadowed with these transparent colored bands which change in size. Is my scanner ready for the scrap pile? You need to replace the lamp, that´s all. ...

...scanner The lamp stopped illuminating. Is it worth replacing the lamp (looks like I will need to take it to a service centre), or better buy a new (which?)model? This one is 8 years old but has been ...

scanner developed a thin green line down the left and a broader yellow line down the right; they both increased in width until I was left with a space only large enough to scan a postcard. I would let

Problems with Umax Astra 1200S Scanner Horizontal stripes when I scan open the scanner and clean the scanner glass and the scanner lamp if the problem didn't solved change the scanner lamp

...will possibly find the cost and time to replace the scanning reader lamp will outway the price of a New scanner. Sorry to be the bearer of Bad tidings. I hope this helped? Paul 'W'

...Scanner Lamp is faulty/blown do you see a bright light that travel up the bed of the glass under the lid when closed if open be careful as very bright if it comes on when scanning. If you do then you ...

...scanner lamp has not warm up yet" & keep counting upto 30 seconds. It will take 4 to five time this exercise than it's ready to scan. Sometime it's not ready to scan even after 10 to 15 ...

My Umax 1200S has a bad exposure lamp.(no part #) Are they still available? The left lamp heater is off..The12vdc to the scanner is good. i was search and there is no spare part for your Umax 1200S

...scanner, but i am having problem while scanning. it shows some yellow and green vertical band on both sides of the page. kindly help me out please. if it's lamp problem, then please let me know how ...

...scanner when you actually try to scan something. The only thing that will activate with only the power cord connected is the scanning lamp inside it so lift the lid and connect the power cord. If the ...