Questions & Answers for: Copystar scanner lamp

All the copies are coming out solid black I have a Royal Copystar Ri 3530 and all of the sudden all the copies are coming out all black, solid black...Tried everything possible, took out the toner, ...

copy star cs2114 when you turn on it blinks c30 C-30 means scanner motor problem. If there is no continuity on the motor coil - replace with a new one The home position switch may be disconnected, or ...

copystar cs 305 scanner is not connecting to computer I can ping the scanner ip address on the computer, but when I scan, the scanner does not connected to the computer. I do not know much about the ...

try a u906... if it happens again... then a u020 if it happens again reset firmware... if it happens again check your scanner lamp... if thats ok then you got main board and/or scanner board problem..

...Machine my office, but I Hi, I have a Copystar Machine in my office, but I don't know how use the SCANNER Option, can you help me with this please, my email adress is [email protected].,

I have a Kyocera CS 3035 and am having an issue with the scanner. I can sign into the scanner via IP address but when I try to scan to PC, the scanner gives me a communication error. I have done the ...

After a power surge, the machine is flashing 400 and C-6. Unable to reset it. if you are unable to reset the error using simulation U163 remove the fixing unit and check the continuity of the heater ...

...a new Cs2520 you have to remove the three tapes holding the pins for light source units 1 and 2.(scanner) To secure the scanner you would have to reinsert those pins if on the left side of the ...

copystar cs-2050 scanner I want to setup the scanner, but the button doesn't do anything and the programming doesn't have the "scan default" option available the 2050 scanner card is an option, it is ...

...scanner PCB,lamp or inverter board,incorrect shading,poor contact of the connector terminals on lamp assembly. Look for a bad connection And look at lamp. Look for blue rings or burnt ends. Now don't ...