samsung DLP will not come on 3 lights fashing First try a "hard rest" , unplug tv for 5 minutes then plug it back in when you go to turn it on hold the power button in for a minute or until you hear a
samsung dlp tv: was indicating need a new bulb change. changed bulb and now will not work. u sure it pluged in all way unplug tv take bulb out look at bulb not broken in side is it re set it in then ...
Question about HL-R4264W 42" DLP HDTV
...OR UNPLUG THE SET, THESE LINES APPEAR. WE REPLACE THE LAMP IT'S GOOD UNTIL WE MOVE OR UNPLUG THE TV? IS IT THE ballast? THE TV IS A 2006 SAMSUNG 50 DLP the plad style picture is the digital
samsung dlp HL56A65 turns off and on by itself Hi I have bought a new dlp tv just over 30 days old, looked beautiful but then started turning off and then turning back on byitself. its weird sometimes
Question about DLP HL-P5663W 56" TV
...SAMSUNG DLP HL-R5067W Tv picture freezes then goes black 10seconds later comes back....tv picture freezes then goes black 10seconds later comes back on. TV cycles in this manner until I unplug and ...
Samsung DLP turns on and off - cycle repeats I have a Samsung HL-R5667W DLP. One day while watching the picture went black and the lamp light started blinking. DIdn't replace it right away. Turned the
Question about DLP HL-P4663W 46" Rear Projection HDTV-Ready Television
Samsung HLR5667W. If I turn on the TV (HDMI or component inputs) the screen freezes often and the TV is unresponsive to remote or buttons. If I unplug it for as little as 20 seconds, it is fine when I
Question about 62HM15 62" Television
...DLP TV won't respond to remote or control panel Our 62HM15 Toshiba DLP TV won't respond to the remote control or control panel to turn on. we tried changing the battery in the remote and changing the ...
...samsung 50 inch dlp. not sure what model number. it turns on and off automatically while pluged in. the display lighs blink simutamiously. please help One of the display blinking lights?It said bulb ...
...Samsung 50" HDTV DLP TV that I purchased 10/12/2008. I turned the set on the other day and it would come on generate a normal picture then power itself off. I unplugged the set for a few hours & ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions