saab turbo 9-3 need computer trouble code the code is p1300 P1300 is random misfiring. I suggest replacing your DI cassette with a known good unit or a replacement unit. Give more info on your vehicle
Saab 900 starts misfiring at about 50 mph. I replaced the plugs before this started happening with plugs that said they did not require setting the gap. Now I see your advice to someone else that they
help ... my 99 saab 95 came up with code P-1304 can anyone help P-1304 = Misfire at Cylinder #4.
...p0300 and 1300 saab 9-5 P0300 Random/Multiple Cylinder Misfire Detected... sounds like di pack is the problem .. check plug to di pack for corrosion first .. but crank sensor can also be faulty
...saab 9-3 aero ignition coil pack misfiring...it is the #3 according to computer...which one is #3?? Number 3 cyl is third from drive belt end of engine.3rd from left as you stand at front.Change DI ...
saab.93.wont.start saab.93.viggan.wont.start.some.misfireing Sounds like DI cassette or spark plug fault. You need to connect a fault code reader to confirm
What code p0031,p0030,p0300 in 2005 Saab 93 Check engine light is on. 30 and 31 are both lambda sensor faults and 300 is random misfire.
saab 9.3 turbo won't start it won't start engine light on, random misfires, so I had plugs changed along with an oil change (full synthetic). Garage kept, go out to start it this evening ...wont start
Question about 2008 9-3
Saab 2.0 turbo 9-3. My OBD scanner says P0300 misfire. I check all 4 coils and one is not fireing! Could that be my misfire issue I’m having at idle? Yes Also replace spark plugs and spark plug wires.
Question about 2008 9-3
saab 2004 9-3 arc - The Check Engine Light is on and the code is p0300. I put in cheap gas the day before and I wonder if this could be the cause. The engine does not run rough or shake or sputter ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions