ice door opener My ice maker works fine but my ice door does not open to let the ice fall into the cup. Help to solve this problem will be greatly appreciated. Thanks GE side x side GSS22SGMC ...
Question about (PSS26MSRSS) Side by Side Refrigerator
...dispenser come off of the door from the outside? sounds like the dispenser door solenoid has either rusted up or failed altogether. rusted up solenoid plunger is very common on the ge sxs. you can ...
Question about 30 in. JGP328 Gas Cooktop
The flame control burners are rusted and not able to increseheat I got to know that I can increase heat by loosenig the screws in burners but the screws are rusted and will not turn! Anyone has any ...
Frost inside the ice dispenser chute and the ice cube dispenser seems "stuck" on crush mode instead of dispensing full cubes. The stuck on crush mode , is caused by ice frosted in front of the ice bin
Question about (PSS26MSRSS) Side by Side Refrigerator
The chute for the ice despenser is freezing up and nothing will come out of the chute because it is frozen solid You should remove the freezer upper door hinge cover , and disconnect the plug there . ...
Question about (PSS26MSRSS) Side by Side Refrigerator
Our automatic ice dispenser hums but doesn't move ice through to be dispensed Resolving the frost in shoot problem . Remove the top freezer door hinge cover , and disconnect the plug there . This ...
Washing pauses and does not start until button pushed even when empty. Does not drain properly. Clothes are still soaked after spin. I can hear the water running into drain. This washer is 4 years old
no water is coming out when I turn on the washer Is the taps turned on ?? If so check for rust in the hose filters which are at the ends of the fill hoses or are in the inlets where the hoses screw on
Question about Spacemaker Washer and Dryer Electric Laundry Center
My washer is leaking and won't agitate properly. I had a similar problem with my GE Washer that leaked, and still won't spin. I fixed the leak though. It was from the pump, which is in the bottom ...
...rusted hole in tub , trying to remove agitator. Tried channel locks , pipe wrench and other tricks to no avail. Maybe I`m doing something wrong model WWA5710 That is a very old GE model. There may be ...
Usually answered in minutes!
3,171 Questions
927 Questions
305 Questions
304 Questions
262 Questions