Questions & Answers for: Pontiac Grand Am runs 2 seconds dies

...2 seconds and then shut down. You will have to replace the ignition cylinder and the sleeve around it which contains the passlock sensor. If you order a passlock sensor it will come with both but you ...

...tank area. It shold buzz for 2 seconds & stop. If no buzz, hit bottom of tank with a rubber mallot or something similar. Try to see if pump runs now. If yes, debris getting stcuk or startting to

runs for 2 or 3 seconds then dies. It has a new air filter, so that's not it. I already 2 cans of HEET and 2 containers of high octain additive. Still won't start without starter fluid or stay running

...2 seconds later another click. This, is the fuel pump relay priming the system for starting. If you have someone put their ear to the filler tube(cap off) while you turn the key on and off, they ...

...runs great then dies, driving and at idle. within seconds of starting it or even after driving for 45min. rpm gauge jumps up and down and hesitates when accelerating. no engine light, replaced crnk ...

04 grand am v6 security light would come on have to turn key on for ten minutes for light to go off. finally car died and fuel pump wont run , changed ign switch and lock cyl and the first time i ...

2.4 liter twin cam theft lite stays on oil lite charging lite brke and cooling lites stay on car ran before if you turn on ignition the car will run for one or two seconds then stalls or quits running

...2 seconds and then dies- restart in a few seconds for another 1-2 seconds; new tank and fuel pump did you change the fuel at the same time as the pump replacement.are you losing fuel pressure/volume ...

2003 grand am wont start im not sure if its the fuel pump, coil packs, or something that would cause it to not get any spark. Check obvious problems first.  Do you have any indicator dash lights ...

...2 seconds. Also, radio does not work but will eject cd and display clock when you press the hour/minute buttons. Lock/unlock buttons do not work along with trunk button. We've tried the override ...