Questions & Answers for: run diagnostics test kenmore he2

...have been the service/diagnostic mode but that wants to run a factory test which involves water fill and agitate Select the rinse/spin cycle turn off the second rinse and voila, you have spin

...Kenmore HE2t reads F26 and stops running half way through cycle DOOR SWITCH ERROR If the door has not been opened for 3 consecutive cycles or the door switch is open while the door is locked for more ...

...pump motor. 5. Check that the drain hose and drain pump filter are clear of foreign objects. 6. Plug in washer or reconnect power. 7. Verify CCU operation by running a Diagnostic Test or any

Kenmore washer HE2 plus and F26 is flashing Once i pick the cycle and his start, nothing starts and it is flashing F26. I don't have the manual. How can i fix it? Thanks! DOOR SWITCH ERROR If the door

...run thru diagnostic test & bypassing service did history mode &diagnosti test also did manuel diagnostic test If these tests do not reset it is possible that the program controller processor ...

...diagnostics or other tests we can run to rest the machine?? Not sure if these will help or not: ...

...run performed diagnostic test by pressing button 4 seconds on/off. Lights flash but no error codes are displayed. door remains locked at all times(used manual release). After lights flash, door locks ...

...run rinse drain and spin cycle with no problems??? Diagnostic test displays F-20, so the following items have been completed... I have checked drain pump and it is clog free. I have removed drain ...

...run diagnostic test. All lights flash, etc., then all blank except "clean clothes" light flashing. What do I do next? Any ideas? Thanks! it sounds like u fixed the problem. have u tried a load of ...

...run the diagnostic test, but I don't think it worked. All the panel lights lit up, but then nothing happened. All the lights went out and the "clean washer" light started flashing. I tried running a ...