Question about HE2 Plus Front Load Washer
...have been the service/diagnostic mode but that wants to run a factory test which involves water fill and agitate Select the rinse/spin cycle turn off the second rinse and voila, you have spin
...pump motor. 5. Check that the drain hose and drain pump filter are clear of foreign objects. 6. Plug in washer or reconnect power. 7. Verify CCU operation by running a Diagnostic Test or any
Question about HE2 Plus Front Load Washer
Kenmore washer HE2 plus and F26 is flashing Once i pick the cycle and his start, nothing starts and it is flashing F26. I don't have the manual. How can i fix it? Thanks! DOOR SWITCH ERROR If the door
...an F21 due to there is no listing for F12. use this kink to put the unit into diagnostics and run the diagnostic menu which will give you your exact error code as well. I await your replyThank you ...
...run thru diagnostic test & bypassing service did history mode &diagnosti test also did manuel diagnostic test If these tests do not reset it is possible that the program controller processor ...
Question about Ap4327152 Motor Control Board for HE2 Plus Front Load Washer
...run to rest the machine?? Not sure if these will help or not: ...
...run performed diagnostic test by pressing button 4 seconds on/off. Lights flash but no error codes are displayed. door remains locked at all times(used manual release). After lights flash, door locks ...
F 11 code F11 code upon diagnostic being run F11--Motor control unit error
...run rinse drain and spin cycle with no problems??? Diagnostic test displays F-20, so the following items have been completed... I have checked drain pump and it is clog free. I have removed drain ...
Question about HE2 Plus Front Load Washer
...run diagnostic test. All lights flash, etc., then all blank except "clean clothes" light flashing. What do I do next? Any ideas? Thanks! it sounds like u fixed the problem. have u tried a load of ...
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions