Questions & Answers for: Jeep Cherokee rubber door boot

...rubber boot on control rod end. L door panel needs to come off to re-connect control rod for rocker switch. (try first just removing lock trim panel and see if you can get to rod from there

rubber boot that connects the doors and the frame which covers the wiring between them. Inside one of the boots (probably on the doors that are most commonly used) you will probably find a broken wire

...and door locks stopped working interior lights stay on also SOUNDS LIKE YOU HAVE BROKEN WIRES BETWEEN DRIVER'S DOOR AND BODY AT A PILLAR..PULL RUBBER BOOT FROM BODY AND DOOR AND INSPECT WIRING ...

...rubber boot in door jam and look for broken wires. this is the most common cause for this. look real good because they could look good and be broke in half so tug on them and seperate them from ...

...door you will see a rubber boot inside are the wires, it very common from opening and closeing the door that some wires may have broken, slide boot back as far as it will go and take a good look for ...

...it be? Check the driverside door area where the wires run thru the door. There will be a rubber boot covering them. Here, you may find the wire is frayed,broken or has pulled away from the

...working no power Pull back the rubber boot that covers the wire harness that passes through the door jam. Most likely you will find a broken wire there, it is a very common problem with this

...door. You will see a rubber boot that protects the wires when the door is opened, pull back the rubber boot from the door, and inspect the wires, the black wire is most likely broke or

...fuses are good, I just have no idea what the problem is. If somebody could help me it would much appreciated. Thank You inside the rubber boots between the door and the body wires break all the ...

...are there might be a broken wire in one of the door boots that hold the wires...open ur pass. Door by the hinges,theres a rubber boot try wiggling it with your hand and run switches..try all ...